Buoyancy is the force opposing gravity exerted on an object immersed in a fluid. When an object is submerged in a volume of fluid pressure increases. There is greater pressure at the bottom of the column of fluid (in the direction of gravity) than there is at the top. Buoyancy is due to this pressure difference: it is the tendency for objects to move towards lower pressure. Buoyancy is the reason some objects float in water.
By Archimedes' principle, the buoyancy force on an object is equal to the weight of the fluid displaced by submerging that object in the fluid. The weight of the fluid is the force due to gravity on the fluid. To find this force, we must know the mass of the displaced fluid, which we can derive from its volume and density. The volume of the displaced fluid is equal to the volume of the object that displaced the fluid. The density is a known property of the fluid (for example, water has a density of approximately 999 kg/m^3 at 1 atm pressure).
buoyancy force on object = volume of object*density of fluid*gravity
BuoyancyPlugin is a Model plugin that calculates the buoyancy force for each link in the model and applies the force to the center of volume of the link. The following optional plugin parameters can be specified using SDF.
<fluid_density>: The density of the fluid surrounding the object in kilograms/cubic meters. Defaults to 999.1026 kg/m^3, the density of water.
name: an attribute of the
<link> element. Must match the name of an existing link in the model.
<center_of_volume>: The center of volume of the link in the link frame. A point in 3-space. Automatically calculated if unspecified.
<volume>: The volume of the link in cubic meters. Automatically calculated if unspecified.
If a link's
<volume> are not specified, they will
be calculated from the dimensions of the collision shapes that compose the
object. This calculation will be accurate if the object is composed of
simple shapes (boxes, cylinders, and spheres). A bounding box approximation
is used for meshes, and polyline shapes.
Here is an example
<!-- ... link info here ... -->
<plugin name="BuoyancyPlugin" filename="libBuoyancyPlugin.so">
<!-- a viscous liquid -->
<center_of_volume>1 2 3</center_of_volume>
underwater.world environment with Gazebo paused:
gazebo --verbose worlds/underwater.world -u
This world contains three submarines. When Gazebo is unpaused, the white submarine will float to the top of the world, the black submarine will sink to the ground plane, and the yellow submarine will maintain a constant height if left undisturbed.
Each submarine model has a propeller link. The yellow submarine has been designed to move forward when the propeller is spun.
Drag out the right hand menu and select the yellow submarine model. Give the
spinning_joint a small positive torque.
The submarine will move forward as the propeller spins. Increasing the torque will cause the submarine to propel forward faster.
The white submarine has a density of 500 kg/m^3. It immediately floats to the top of the world when simulation is unpaused because the buoyancy force is greater than gravity. On the other hand, the black submarine has a density is 1500 kg/m^3, so it sinks to the ground plane. The yellow submarine has a density of exactly 999.1026 kg/m^3, so it floats at equilibrium unless disturbed by other forces.
The submarine propellers are constructed so that spinning the propeller joint generates drag forces in forward direction. The blades are tilted such that the angle of attack for the blades is always less than 45 degrees. The propeller blades spin in the plane orthogonal to the direction of forward motion. Because lift and drag are orthogonal, a lift force gets generated in the forward direction. The lift force on the propeller causes the entire body to move forward.
For each propeller blade, the lift and drag forces are applied at the center of pressure of the blade, approximately 70% of the radius from the center of the propeller along the axis of the blade. The center of pressure is also the point at which the velocity is measured for calculating the lift and drag forces. This is important for a rotating body because if the center of the propeller were used to calculate lift and drag, the forces would always be zero.